Models

PUL-A-PUMP® Models

Our models provide portable one-man well pulling. The machine is constructed of stainless steel and aluminum on 16” wheels and weighs approximately 190 pounds. The home owner will love your courteous appreciation of their lawn and you the pump guy will also (no truck ruts!)

All PUL-A-PUMP® models include one well mount (size of your choice), a pendant machine control switch and power supply cord.

We have four model types available:

  • MODEL #1692A 36" TRACTION BELTS - 1 HP/220V - EASY LIFTING CAPACITY 700 LBS
  • MODEL #1692A 36" TRACTION BELTS - 1 HP/110V - EASY LIFTING CAPACITY 550 LBS.
  • MODEL #1692ALM 36" TRACTION BELTS - 1 HP/220V - EASY LIFTING CAPACITY 700 LBS.
  • MODEL #1692ALM 36" TRACTION BELTS - 1 HP/110V - EASY LIFTING CAPACITY 550 LBS.

WELL MACHINES WITH UNSURPASSED FEATURES

Some of the features available on our PUL-A-PUMP® equipment include:

  • Well mount sizes of your choice inserting into or around the well casing, automatically leveling and supporting the machine from the top edge of the casing. This ensures a solid connection for stable operation. With the wheels removed, the machine will set parallel to grade or on planks/cribbing over dug holes for well heads below grade. Well pits/tanks are no problem; just remove the wheels and set the machine on the flat surface.
  • Dual Driven TRACTION BELTS are constantly adjusting to the pipe which may have additional torque arresters, cable guards, wire, ropes and clamps. Elongated belt design gives greater surface contact for SUPERIOR TRACTION.
  • By machine design traction automatically increases with the weight of the pipe and pump, assuring positive grip. DUAL WORM GEAR DRIVES will hold the pipe in STOP positon along with the manual hand brake for the deeper wells.
  • The lifting speed of 50 feet per minute: gives the operator optimum control and power when raising or lowering the well.
  • 1 HP MOTOR is operated by pendant, push-button switch wired for either 110V or 220V (Choice determined by voltage most commonly used on your pumps & allows tapping into the power source at the well head rather than running extension cords).
  • BELT Drives swing apart easily, providing a full view into the well, & when engaged for operation, track in parallel alignment to each other while being stabilized by neoprene draw latches, further enhancing traction, all while conforming automatically to varying diameters that result when passing pitiless adapters, torque stops, plastic wire guides & well pumps through the traction belts during removal or installation of well pump systems.
  • There are machines in the field today over 25 years old still pulling wells. Stainless steel and aluminum construction throughout, sealed bearing, stainless steel axles, and neoprene rubber ensures longevity of all components.

The optional overhead guide is supported by 1 inch aluminum pipes at a height of 12 feet above the machine base to stabilize the rigid pipe as it is pulled up out of the well & unscrewed.

The winch system is set directly on the base of the machine and locked into position by three 4 foot tall legs. Allowing the operator to easily access the top of the well giving full view of the hole to reset the pitless adapter. How many times has the 20-year-old pitless adapter been stuck in place? With the winch system, you can apply 1000 pounds of lift to free the adapter and be on your way.